Floor stickers

Ordering floor stickers at Print.com

Floor stickers for indoor/outdoor, carpet or tarmac, you can order them at Print.com. In our order app, you will find floor stickers with a lifespan from 1 month to 5 years. You choose what best suits your design and project (or that of your customer).

Material for floor stickers

In our ordering app for professionals, you will find six different types of materials to print your floor sticker on. These materials are:

• Canon® IJM715
• Orajet® 3162
• 3M® IJ20-10R
• Orajet® 3551
• Prime® High Tack
• 3M® 3662

All these materials have different benefits and are suitable for different purposes. Are you going for a short lifespan because you are organising an event? Or do you want longer visibility of up to 5 years? All our floor stickers are scratch-proof, UV-resistant and water-resistant.

Canon® IJM715 as a floor sticker

This white foil is suitable for temporary indoor applications and can be used on various surfaces such as tiles and wooden floors, as well as untreated stone. The material is easy to apply and does not require lamination. The material has a textured surface, i.e. an anti-slip layer, R10 classified.

Orajet® 3162 as a floor sticker

This white monomer foil is suitable for temporary indoor and outdoor applications and can be used on flat surfaces. This material is easy to apply. The material is scratch-resistant, UV-resistant and water-resistant.

3M® IJ20-10R as a floor sticker

This white monomer foil can be used indoors and outdoors on flat surfaces. This material has an expected lifespan of 2 years and is scratch-resistant, translucent, UV-resistant and water-resistant.

Orajet® 3551 as a floor sticker

This white polymer can be used long-term indoors and outdoors on flat and slightly curved surfaces. This material has an expected lifespan of 5 years. This material is also scratch-resistant, UV-resistant and water-resistant.

Prime® High Tack (carpet foil)

The Prime carpet foil is a removable polymer calendered foil with a high tack adhesive suitable for flat and slightly undulating low-energy surfaces such as polypropylene, polyurethane, polyethene and ABS. In addition, this print foil is suitable for low-pile rugs and carpets with a slight texture.

The specially designed high tack adhesive layer makes the foil compatible with difficult-to-stick surfaces. Easily removable and thus very suitable for short-term applications. It is recommended to laminate the foil, as this will benefit its longevity.

3M® 3662 (Asphalt film)

The 3M Scotchcal 3662 Outdoor Floor laminate is a removable cast print foil suitable for flat outdoor applications on such surfaces as tarmac, concrete or paving stones. The material is scratch-resistant, UV-resistant and water-resistant.

Besides floor stickers, you will also find wall stickers, window stickers and car stickers in our ordering app for professionals. Looking for a smaller format sticker? Then take a look at our stickers on rolls, small stickers, doming stickers or sticker sheets.

Options for floor stickers

Type of print

• None
• 4/0 Full colour

Finishes

• Clean cut
• Contour cutting (through cut)

Sizes

• Standard size: 30 x 20 cm, 40 x 30 cm, 60 x 40 cm, 90 x 60 cm, 100 x 100 cm
• A-size: A4 – 210 x 297 mm, A3 – 297 x 420 mm, A2 – 420 x 594 mm, A1 – 549 x 840 mm, A0 – 840 x 1189 mm

Amount

• From 1 piece to 10,000 pieces

Material for floor stickers

• Canon® IJM715 (floor foil)
• Orajet® 3162 (white monomer)
• 3M® IJ20-10R (white monomer)
• Orajet® 3551 (polymer white)
• Prime® High Tack (carpet foil)
• 3M® 3662 (tarmac foil)

Finishes for floor stickers

Laminate:

• None
• Oraguard® 250 AS (monomer floor laminate 170 micron)
• Oraguard® 255 AS (monomer floor laminate 170 micron)
• 3M® 3645 (cast floor laminate 200 micron)
• 3M® 3647 (cast tarmac laminate 500 microns)

Delivery of floor stickers

Scheduled delivery time:

• A day earlier: 2 working days
• Standard: 3+ working days

Service with extra assurance:

• Standard
• Extra Care
• Priority

Read all about our delivery.